场发射平板显示高低压电平转换电路

提出适用于场发射高压驱动的高低压电平转换电路设计及性能分析。通过模拟,此电路可以在100V的驱动工作电压以及10mA的驱动电流条件下安全工作,最高工作频率可达20MH_z。在50pF输出负载下上升时间和下降时间分别为14,25ns。同时分析了高压CMOS器件与0.8μm标准CMOS工艺兼容过程中的厚栅氧化对于低压器件及高压N管的阈值特性影响。     

可重构制造系统重组过程中设备选择模型的研究

根据生产任务选择加工设备进行制造资源重组是实现可重构制造系统的关键问题之一，由于设备的选择涉及到多种因素，既有定量指标，又有定性指标，传统的依靠人工经验的方法显得力不从心。本文首先结合实际情况，提出了一套设备选择评价体系，通过对模糊判断矩阵采用最小对数二乘法确定各评价因素的权重系数，针对定性指标和定量指标采用不同的方法确定其性能指标值，通过模糊积分对评判指标进行综合评判，最后进行了实例研究。所提出的方法有效地简化了决策过程，为可重构制造系统设备选择提供了一套行之有效的方法。     

Parametric estimation of discretely sampled Gamma-OU processes

The stationary Gamma-OU processes are recommended to be the volatility of the financial assets. A parametric estimation for the Gamma-OU processes based on the discrete observations is considered in this paper. The estimator of an intensity parameter A and its convergence result are given, and the simulations show that the estimation is quite accurate. Assuming that the parameter A is estimated, the maximum likelihood estimation of shape parameter c and scale parameter a, whose likelihood function is not explicitly computable, is considered. By means of the Gaver-Stehfest algorithm, we construct an explicit sequence of approximations to the likelihood function and show that it converges the true (but unkown) one. Maximizing the sequence results in an estimator that converges to the true maximum likelihood estimator and the approximation shares the asymptotic properties of the true maximum likelihood estimator. Some simulation experiments reveal that this method is still quite accurate in most of rational situations for the background of volatility.     

A primer on perfect simulation for spatial point processes

This primer provides a self-contained exposition of the case where spatial birth-and-death processes are used for perfect simulation of locally stable point processes. Particularly, a simple dominating coupling from the past (CFTP) algorithm and the CFTP algorithms introduced in [13], [14], and [5] are studied. Some empirical results for the algorithms are discussed. Received: 30 June 2002     

N指标d维广义Wiener过程象集的m项代数和的几个性质

设珮犠（狋）：犚犖＋ →犚犱是犖指标犱维广义Ｗｉｅｎｅｒ过程，对任意紧集犈１，…，犈犿犚犖＞ ，该文研究了犿项代数和珮犠（犈１）…珮犠（犈犿）的Ｈａｕｓｄｏｒｆｆ维数，Ｐａｃｋｉｎｇ维数和正的Ｌｅｂｅｓｇｕｅ测度及内点的存在性． 其结果包含并推广了布朗单的结果．     

Banach空间中强增生型变分包含解的具误差的Ishikawa迭代逼近

该文研究Ｂａｎａｃｈ空间中一类强增生型变分包含解的存在性及其具误差的Ｉｓｈｉｋａｗａ迭代程序的收敛性问题．该文结果是几位作者早期与最近的相应结果的改进和推广．     

Stochastic signal analysis: Numerical representation and applications to system theory

Alternative procedures for representing a stochastic signal as a denumerable series with uncorrelated terms are developed. The study includes considerations about parametric rescaling and its repercussions on the orthogonal expansion, as well as numerical techniques for approaching such an expansion. In addition, applications to the Gaussian characterization of stochastic signals, filtering and stochastic modelling are treated.     

Differential Entropy and Dynamics of Uncertainty

We analyze the functioning of Gibbs-type entropy functionals in the time domain, with emphasis on Shannon and Kullback-Leibler entropies of time-dependent continuous probability distributions. The Shannon entropy validity is extended to probability distributions inferred from L ²(R ⁿ ) quantum wave packets. In contrast to the von Neumann entropy which simply vanishes on pure states, the differential entropy quantifies the degree of probability (de)localization and its time development. The associated dynamics of the Fisher information functional quantifies nontrivial power transfer processes in the mean, both in dissipative and quantum mechanical cases. PACS NUMBERS: 05.45.+b, 02.50.-r, 03.65.Ta, 03.67.-a     

强激光在窄通道中传播的理论研究

在考虑相对论和有质动力非线性以及全局电量守衡的前提下,分析了强激光在冷等离子体窄通道中稳定传播的情况。采用较为简化的二维理论模型,给出了描述激光和通道横向结构的解,对不同通道宽度、通道密度、激光强度和电磁模式等进行了讨论,分析了其对激光在等离子体通道中传播的影响。分析发现,在存在预通道的情况下,当等离子体通道的密度大于临界密度很多时(例如20倍临界密度),即使是在激光波长量级的通道中,激光仍然可以传播。通道越宽,等离子体密度越小;激光强度越大越容易传播。在同样的通道和传输情况下,TE0模传输所需要的激光强度比TE1模要小。     

Calibrating software reliability models when the test environment does not match the user environment

Software failures have become the major factor that brings the system down or causes a degradation in the quality of service. For many applications, estimating the software failure rate from a user's perspective helps the development team evaluate the reliability of the software and determine the release time properly. Traditionally, software reliability growth models are applied to system test data with the hope of estimating the software failure rate in the field. Given the aggressive nature by which the software is exercised during system test, as well as unavoidable differences between the test environment and the field environment, the resulting estimate of the failure rate will not typically reflect the user‐perceived failure rate in the field. The goal of this work is to quantify the mismatch between the system test environment and the field environment. A calibration factor is proposed to map the failure rate estimated from the system test data to the failure rate that will be observed in the field. Non‐homogeneous Poisson process models are utilized to estimate the software failure rate in both the system test phase and the field. For projects that have only system test data, use of the calibration factor provides an estimate of the field failure rate that would otherwise be unavailable. For projects that have both system test data and previous field data, the calibration factor can be explicitly evaluated and used to estimate the field failure rate of future releases as their system test data becomes available. Copyright © 2002 John Wiley & Sons, Ltd.